Turning at junctions is perhaps one of those driving skill that many beginners struggle with. There’s a lot of practice and patience that goes into perfecting it and although it may seem like you can never perfect it, you can master it with ample practice.
You might feel scared at first but keep practicing, and you’ll eventually get there.
Here are a few steps you can follow to perfect this skill.
Spot the Junction Beforehand
First and foremost, you should know about the upcoming junction before actually arriving at it. If you fail to notice upcoming junctions you might be forced brake abruptly, which can be dangerous for the occupants in your car. If you’re in a driving test, you can expect your examiner to fail you over this error. It’s better to look ahead and spot any upcoming junctions, so you’ll have enough time to adjust your drive accordingly.
After spotting the junction, proceed to checking all of the mirrors, starting with the rear view mirror, then the right and left side mirrors. Begin signaling right using the indicators, and then comes road positioning. This is where most learners make mistakes during their driving tests, so if you’re preparing for one, in that case, stay extra cautious.
If your road has a single lane on both sides, then position yourself in the lane’s mid. Furthermore, ensure that you’re keeping right without clipping the curb.
After positioning, ensure that you’re driving at a suitable speed, which depends more on the type of junction you are about to approach, but the appropriate speed in many cases is below 15 mph in the 2nd gear. Approaching junctions faster would make it difficult for drivers to look around for any potential hazards like pedestrians or other vehicles using the same junction.
After successfully turning into the junction, use the car’s mirrors to ensure that there are no speeding vehicles behind you. Finally, make sure that you indicator signal isn’t still on.
The steps for turning left into the junction are quite similar to the steps for turning right, but with some notable differences:
- As the driver, you must position your car toward the middle lane instead of positioning to the right.
- Your speed while approaching the junction should be slower—5mph and in the first gear.
- If you find the junction closed, you’d need to proceed gently, which would require perfect clutch control.
- As you’d be passing traffic from two lanes, careful observation is a must. Properly asses the gap and once you’ve found ample space you can proceed.
The best way to perfect turning at junctions is to get professional training from reliable driving school like us at Jacob’s Driving and Traffic School in Arizona. We’re one of the most experienced driving institutions that can help up you perfect various driving skills! Book a lesson online or contact us at (602) 297-1000.